2 Bow Bimini Installation Instructions

Download 2 Bow Bimini Instructions pdf

2 BOW BIMINI INSTALLATION INSTRUCTIONS

[tx_divider size=”10″]

Components (Included in the box)

[tx_divider size=”10″]

[tx_row]

[tx_column size=”1/3″]

[/tx_column]

[tx_column size=”1/3″]

[/tx_column]

[tx_column size=”1/3″]

[/tx_column]

[/tx_row]

[tx_divider size=”24″]

[tx_row]
[tx_column size=”1/4″]

[/tx_column]

[tx_column size=”1/4″]

[/tx_column]
[tx_column size=”1/4″]

[/tx_column]
[tx_column size=”1/4″]

[/tx_column]
[/tx_row]

[tx_divider size=”10″]

2 Bow Bimini Assembly Instructions

[tx_divider size=”10″]

[tx_row]
[tx_column size=”1/2″]

STEP 01

FIT CROSSBARS INTO STARBOARD FRAME

[/tx_column]
[tx_column size=”1/2″]

STEP 02

LAY FABRIC AS SHOWN (SLEEVES UP).
FEED THE CROSSBARS THROUGH FABRIC SLEEVES
(LONG UPRIGHT GOES THROUGH REAR SLEEVE)

[/tx_column]
[/tx_row]

[tx_row]
[tx_column size=”1/2″]

STEP 03

COMPLETE BIMINI BY ATTACHING THE PORT FRAME TO CROSSBARS (AS IN STEP 1)

[/tx_column]
[tx_column size=”1/2″]

STEP 04

ATTACH WEBBING STRAPS TO BIMINI

[/tx_column]
[/tx_row]

[tx_row]
[tx_column size=”1/2″]

STEP 05

ATTACHING THE BIMINI TO THE BOAT

1. Locate where the Bimini Deck Mounts will be placed. Measure and confirm the marks for the Deck Mounts to ensure they are exactly opposite each other. 1. Locate where the Bimini Deck Mounts will be placed. Measure and confirm the marks for the Deck Mounts to ensure they are exactly opposite each other. If Deck Mounts are not parallel, the Bimini will be unbalanced.

2. Drill and secure the Deck mounts using suitable
hardware (not supplied).
Note: The taper on the Deck Mounts; ensure they
lean inwards to match the Bimini frame.
Place Bimini into deck mounts as shown.
Secure tube ends with Self Tapping Screws.

[/tx_column]
[tx_column size=”1/2″]

3. POSITIONING THE SADDLES.
The distance between the Deck Mounts and Saddles depends on personal preference, however placement between 0.9m – 1.1m (35” – 43”) is recommended.
Drill and secure the saddles using suitable hardware (not supplied).

4. Tighten and adjust webbing until even tension is achieved across bimini.

[/tx_column]
[/tx_row]

[tx_divider size=”10″]

Integrated Storage boot instructions

[tx_divider size=”10″]

[tx_row]
[tx_column size=”1/2″]

STEP 01

RELEASE THE SNAP HOOK

[/tx_column]
[tx_column size=”1/2″]

STEP 02

UNZIP PANEL ON THE REAR POCKET TO RELEASE STORAGE BOOT PANEL

[/tx_column]
[/tx_row]

[tx_row]
[tx_column size=”1/2″]

STEP 03

FOLD THE BIMINI & PLACE THE WEBBING STRAPS ON THE TOP

[/tx_column]
[tx_column size=”1/2″]

STEP 04

FOLD PANEL OVER BIMINI TOP & WEBBING STRAPS

[/tx_column]
[/tx_row]

2 Bow Bimini Installation Instructions